Affiliation:
1. Engineering Physics and Mathematics Department, Faculty of Engineering, Ain Shams University, Cairo 11517, Egypt
2. Department of Physics, College of Science, Northern Border University, Arar 73222, Saudi Arabia
3. Electrical Engineering Department, Future University in Egypt, Cairo 11835, Egypt
Abstract
Solar energy is the most used renewable energy source. CZTSSe uses earth-abundant elements and has promising optoelectronic properties, resulting in becoming a viable alternative to thin film PV. This work provides design guidelines for CZTSSe-based solar cells, where CZTSSe has a tunable affinity and energy gap. The analysis is based on incorporating a ternary compound material to serve as an electron transport material (ETM). In this regard, CdZnS is a potential candidate that can be utilized as an electron transport layer whose affinity and energy gap can be tuned to adjust the band alignment at the ETL/CZTSSe interface. In order to design a high-efficiency solar cell, one has to tune both the ETL and absorber layers to have a suitable conduction band offset (CBO), thereby minimizing the non-radiative recombination which, in turn, boosts the power conversion efficiency (PCE). Thus, in our presented simulation study, we provide a codesign of alloy compositions of both the CZTSSe photoactive layer and the CdZnS ETL using SCAPS-1D simulation. It is found that using the codesign of alloy compositions of the ternary compound ETL and the absorber enhances the PCE by about 2% and, more importantly, overcomes the main issue in CZTSSe which is its open-circuit voltage (VOC) deficit. Furthermore, upon optimizing the thickness and doping of both the ETL and absorber layer, as well as the bulk defect of the absorber layer, a PCE of 17.16% is attained in this study, while the calibrated PCE based on a previously published experimental work was 12.30%.
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction
Reference49 articles.
1. (2023, March 01). Renewables 2019—Analysis—IEA. Available online: https://www.iea.org/reports/renewables-2019.
2. From Crystalline to Low-cost Silicon-based Solar Cells: A Review;Okil;Silicon,2021
3. Salem, M.S., Zekry, A., Shaker, A., and Abouelatta, M. (2016, January 5–10). Design and simulation of proposed low cost solar cell structures based on heavily doped silicon wafers. Proceedings of the 2016 IEEE 43rd Photovoltaic Specialists Conference (PVSC), Portland, OR, USA.
4. Zhang, Y., and Liu, H. (2019). Nanowires for High-Efficiency, Low-Cost Solar Photovoltaics. Crystals, 9.
5. Physically Based Analytical Model of Heavily Doped Silicon Wafers Based Proposed Solar Cell Microstructure;Salem;IEEE Access,2020