Changes in the Rheological and Adhesive Properties of Epoxy Resin Used in the Technology of Reinforcement of Structural Elements with CFRP Tapes

Abstract

Nowadays, FRP composites are widely applied in the construction industry. Their inherent characteristics are used to strengthen structural elements made of various materials and to increase their durability. The following paper contains the results obtained in a conducted research program aimed at determining the ability to improve the durability of epoxy resin modified with the sonication process, microsilica and carbon nanotubes. The adhesive modified was used to adhere a CFRP tape to a concrete surface. Changes in the viscosity, physicochemical parameters and adhesion of the resin were studied. Selected parameters of the concrete substrate prepared using the sandblasting method, determined with the contact profilometry, were also taken into account. During the tests, attention was paid to the thorough execution and preparation of the samples. As a result of the research, it was demonstrated that the adhesion of the modified epoxy adhesive to concrete could be increased by approximately 28% in the case of the addition of carbon nanotubes and by up to 66% in the case of the addition of microsilica. The modifications used, in addition to increasing the adhesion of the resin to the concrete substrate, were also aimed at reducing the weakening of the adhesive joints caused by oxidation of the resin over time. The results obtained will serve as a basis for evaluating the possibility of their use in the practical reinforcement of structural reinforced-concrete elements.