Optimization of Cellulose Recovery Using Deep Eutectic Solvent Fractionation: A Response Surface Method Approach

Abstract

Lignocellulosic biomass is a crucial renewable energy source for producing biofuels and valuable compounds, making it an attractive alternative to fossil resources. In this study, an environmentally friendly method was developed for cellulose fractionation from sugarcane bagasse using deep eutectic solvents (DESs), focusing on achieving high cellulose purity and specific physicochemical properties. The effects of different parameters were investigated by comparing four DESs: choline chloride–lactic acid (ChCl-LA), choline chloride–glycerol (ChCl-G), choline chloride–urea (ChCl-U), and choline chloride–polyalcohol (ChCl-P), under various reaction temperatures and times. The fractionation process was conducted under standard conditions at a temperature of 100 °C for 120 min with a 1:1 molar ratio. The results indicated that all DESs produced comparable cellulose recovery, ranging from 91.83% to 97.07%. A relatively high cellulose recovery was observed in the presence of ChCl-LA, at 95.47%. In addition, ChCl-LA demonstrated the highest efficiency in removing hemicellulose and lignin, at 95.36% and 93.38%, respectively, and high recovery yields of 70.45% for hemicellulose, and 70.66% for the lignin fraction. The fractionation conditions were further optimized using response surface methodology (RSM), achieving a ChCl-LA ratio of 1:2 v/v at 120 °C for 120 min. This resulted in impressive yields: 97.86% cellulose recovery, 96.50% hemicellulose removal, 74.40% hemicellulose recovery, 77.3% lignin recovery, and 71.5% lignin yield from sugarcane bagasse. These results closely match the predicted values, emphasizing the effectiveness of the process and its potential for economic application in lignocellulosic biorefinery operations.