Affiliation:
1. Department of Mechanical Engineering, College of Engineering, Alfaisal University, Takhassusi St., Al Maather Road, P.O. Box 50927, Riyadh 11533, Saudi Arabia
Abstract
In a previous work, a solar chimney power plant integrated with a solid sorption cooling system for power and cold cogeneration was developed. This prior work showed that reusing the heat released from the adsorption bed enhances the system’s utilization of solar energy and increases the turbine’s output power. In the present paper, a subsequent modification to the arrangement and operation of the preceding system is introduced. The primary objective of the modification is to enhance performance and increase the plant’s capacity to effectively harness the available solar radiation. The method involves placing the condenser tubes at the solar collector entrance. Therefore, the airflow captures the condenser-released heat before it enters the collector. The modified configuration and operation of the system are discussed. A dynamic mathematical model is established to simulate the hybrid system’s operation and evaluate its parameters. The obtained results show that a 5.95% increase in output power can be achieved by recovering the heat of condensation. Furthermore, the modified system attains a 6% increase in solar-to-electricity conversion efficiency compared with the basic system. The findings suggest that the modified system, which recycles condenser heat, provides noticeable enhanced performance compared with the basic system.
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction