Affiliation:
1. College of Mechanical and Electrical Engineering, Shaanxi University of Science & Technology, Xi’an 710021, China
Abstract
The inner roller exerts a supportive and thinning effect on the inner side of the tube during counter-roller spinning. In this paper, the Finite Element Analysis (FEA) model of counter-roller spinning for a 6061 aluminum alloy tube was established based on the ABAQUS/Explicit module. The deformation characteristics and the influence of inner roller geometrical parameters on the tube spinning were analyzed. The results showed that the stress–strain on the outer of the tube was greater than that of the inner, and flaring was more prone to occur in the initial stage of counter-roller spinning compared to traditional mandrel spinning. The order of the effects of geometrical parameters of the inner roller on the roundness error and wall thickness deviation was as follows: nose radius > diameter > front angle. The order of factors influencing the inner and outer spinning force was as follows: diameter > nose radius > front angle. Increasing the diameter of the inner roller can improve the spinning stability and forming accuracy of counter-roller spinning. It was beneficial to improve the forming accuracy when the nose radius of the inner roller was slightly larger than that of the outer roller. The front angle of the inner roller has little influence on the spinning forming accuracy.
Funder
National Natural Science Foundation of China
Natural Science Foundation of Shaanxi University of Science and Technology
Subject
General Materials Science,Metals and Alloys
Reference36 articles.
1. A review of the mechanics of metal spinning;Music;J. Mater. Process. Technol.,2010
2. A review of process advancement of novel metal spinning;Xia;Int. J. Mach. Tools Manuf.,2014
3. Progresses and applications of counter-roller spinning technology for metal thin-walled cylinders;Zhang;China Mech. Eng.,2022
4. A review of spinning, shear forming and flow forming processes;Wong;Int. J. Mach. Tools Manuf.,2003
5. Review on hot spinning for difficult-to-deform lightweight metals;Zhan;Trans. Nonferrous Met. Soc. China,2015
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献