Near-Surface Wind Profiling in a Utility-Scale Onshore Wind Farm Using Scanning Doppler Lidar: Quality Control and Validation

Author:

Ma Teng12ORCID,Yu Ye123,Dong Longxiang13,Zhao Guo123,Zhang Tong13,Wang Xuewei12,Zhao Suping123ORCID

Affiliation:

1. Key Laboratory of Land Surface Process and Climate Change in Cold and Arid Regions, Northwest Institute of Eco-Environment and Resources, Chinese Academy of Sciences, Lanzhou 730000, China

2. College of Earth Science, University of Chinese Academy of Sciences, Beijing 100049, China

3. Pingliang Land Surface Process and Severe Weather Research Station, Chinese Academy of Sciences, Pingliang 744015, China

Abstract

Wind profiling within operating wind farms is important for both wind resource assessment and wind power prediction. With increasing wind turbine size, it is getting difficult to obtain wind profiles covering the turbine-affecting area due to the limited height of wind towers. In this study, a stepwise quality control and optimizing process for deriving high-quality near-surface wind profiles within wind farms is proposed. The method is based on the radial wind speed obtained by the Doppler Wind Lidar velocity-azimuth display (VAD) technique. The method is used to obtain the whole wind profile from ground level to the height affected by wind turbines within a utility-scale onshore wind farm, in northern China. Compared with the traditional carrier-to-noise ratio (CNR) filter-based quality control method, the proposed data processing method can significantly improve the accuracy of the derived wind. For a 10 m wind speed, an increase in coefficient of determination (R2) from 0.826 to 0.932, and a decrease in mean absolute error (MAE) from 1.231% to 0.927% are obtained; while for 70 m wind speed, R2 increased from 0.926 to 0.958, and MAE decreased from 1.023% to 0.771%. For wind direction, R2 increased from 0.978 to 0.992 at 10 m, and increased from 0.983 to 0.995 at 70 m. The optimized method also presents advantages in improving the accuracy of derived wind under complex wind environments, e.g., inside a wind farm, and increasing the data availability during clear nights. The proposed method could be used to derive wind profiles from below the minimum range of a vertically operating scanning Doppler Lidar to a height affected by wind turbines. Combined with Doppler beam-swinging (DBS) scanning data, the method could be used to obtain the complete wind profile in the boundary layer. These wind profiles could be further used to predict wind power and evaluate the climate and environmental effects of wind farms.

Funder

National Key Research & Development Program of China

National Natural Science Foundation of China

CREEI

Gansu Science and Technology Plan Project

Chinese Academy of Sciences

Publisher

MDPI AG

Reference41 articles.

1. A Review of Modern Wind Turbine Technology;Balat;Energy Sources Part A Recovery Util. Environ. Eff.,2009

2. Recent technology and challenges of wind energy generation: A review;Roga;Sustain. Energy Technol. Assess,2022

3. Modeling wake effects in large wind farms in complex terrain: The problem, the methods and the issues;Politis;Wind Energy,2012

4. Modelling and measuring flow and wind turbine wakes in large wind farms offshore;Barthelmie;Wind Energy,2009

5. In situ observations of the influence of a large onshore wind farm on near-surface temperature, turbulence intensity and wind speed profiles;Smith;Environ. Res. Lett.,2013

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3