Affiliation:
1. Department of Civil Engineering, Universidad Católica de la Santísima Concepción, Concepción 4070128, Chile
Abstract
The use of column-tree connections is common in controlled shop environments due to their cost-effectiveness in achieving ductile welds. Field bolts are also easy to install and inspect. However, there is currently no prequalification available for these connections, their performance is not fully understood, and the cost of aftermath repairs is still a major concern for owners. In this research, analytical and numerical studies were performed to assess the cyclic behavior considering the effects of the bolted splice location, bolt slippage, and splice plate thickness. Fourteen numerical models using the finite element method in ANSYS software were analyzed to evaluate the nonlinear behavior of moment connection configurations in terms of the strength, stiffness, ductility, energy dissipation, and overall cyclic response. The results showed that appropriately proportioned bolted splice connections can meet the requirements for prequalified moment connections. The models complied with the criteria established in AISC 358 and achieved flexural resistance that was higher than 80% of the beam plastic moment at 4% of the interstory drift ratio. The weakened plates concentrated the inelastic action, which allowed us to prevent the brittle behavior and damage to the column, welding, and other components of the moment connection. Complex geometries or specially fabricated parts were not required, providing a cost-effective way to control seismic-related damage. Also, required repairs are based on the replacement of standard parts, reducing operational detentions in facilities. Finally, the moment connection studied is classified as partially restrained (PR) according to the requirements established in AISC 360.
Funder
Proyectos Ingeniería 2030
InES—Ciencia—Abierta
Subject
Building and Construction,Civil and Structural Engineering,Architecture
Reference36 articles.
1. FEMA (2000). State of the Art Report on Connection Performance, SAC Joint Venture.
2. AISC (2005). AISC 358—Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications, American Institute of Steel Construction.
3. Damages to Steel Structures Caused by the 1995 Kobe Earthquake;Horikawa;Struct. Eng. Int.,1996
4. Steel Moment Frames for Earthquakes in United States and Japan;Nakashima;J. Struct. Eng.,2000
5. Evolution of seismic building design practice in Japan;Whittaker;Struct. Des. Tall Build.,1998