Experimental Study on and Finite Element Analysis of the Axial Compression Bearing Capacity of a UHPC Transfer Device for Pre-Stressed Anti-Floating Anchor Rods-Reference-Cited by-同舟云学术

Experimental Study on and Finite Element Analysis of the Axial Compression Bearing Capacity of a UHPC Transfer Device for Pre-Stressed Anti-Floating Anchor Rods

Published:2024-04-12 Issue:4 Volume:14 Page:1075
ISSN:2075-5309
Container-title:Buildings
language:en
Short-container-title:Buildings

Author:

Zhu Yi¹,Li Yi²,Tang Zhen-Xing³,Liu Pei-Lin³,Yang Zhuo¹

Affiliation:

1. School of Civil Engineering, Hunan University of Science and Technology, Xiangtan 411100, China

2. School of Civil Engineering, Changsha University of Science and Technology, Changsha 410000, China

3. Hunan Hongxing Anti-Floatation Engineering Technology Co., Changsha 410000, China

Abstract

A new UHPC pre-stress transfer device is proposed for pre-stressed anti-floating anchor rods. To investigate the axial compression performance of the device during pre-stressing, physical experiments and a finite element verification were conducted on four different types of full-scale device specimens. The changes in the axial displacements and ultimate bearing capacities under axial pressure for the different types of devices were analyzed. The results indicated that bending failures occurred in the upper plate portions of all the types of specimens, with transverse cracks appearing near the upper plate portions of the short columns. The axial compression ultimate bearing capacity of each specimen exceeded the design value. Among them, the axial compression ultimate bearing capacity of the HM18 device increased the most relative to its design value by 87%, while axial compression ultimate bearing capacity of the HM45 device increased the least relative to its design value by only 2%. The new UHPC transfer device exhibits good applicability in pre-stressed anti-floating anchor rods.

Publisher

MDPI AG

Link

https://www.mdpi.com/2075-5309/14/4/1075/pdf

Reference28 articles.

1. Field Comparative Experimental Study and Mechanism Analysis on Anchoring Performance of Two Different Materials Anti-Float Anchors;Bai;J. Civ. Eng.,2015

2. Cheng, L.K. (2001). Current Situation and Development of Soil and Rock Anchorage. J. Civ. Eng., 7–34. (In Chinese).

3. Zhang, M.Y., Zhang, J., Liu, J.W., and Zhao, H.F. (2008). Experimental Study on Anti-Float Anchors in Weathered Granite. Chin. J. Rock Mech. Eng., 2741–2746. (In Chinese).

4. (2019). Building Engineering Anti-Float Technology Standard (Standard No. JGJ 476-2019).

5. Design Research on Full-Length Pressure-Type Post-Tensioned Prestressed Anti-Float Anchor Structure;Tan;Build. Struct.,2021