Experimental Firing Test Campaign and Nozzle Heat Transfer Reconstruction in a 200 N Hybrid Rocket Engine with Different Paraffin-Based Fuel Grain Lengths

Abstract

Firing test campaigns were carried out on a 200 N thrust-class hybrid rocket engine, using gaseous oxygen as an oxidizer and a paraffin-wax-based fuel. Different fuel grain lengths were adopted to extend the fuel characterization under different operating conditions, and to evaluate rocket performances and internal ballistics in the different configurations. In addition to data collected under a 220 mm propellant grain length, two further test campaigns were carried out considering 130 mm and 70 mm grain lengths. Two different injector types were adopted in the 130 mm configuration; in particular, a showerhead injection system was used with the aim to contain high-amplitude pressure oscillations observed during some firing tests in this engine configuration. Parameters such as the chamber pressure and temperature inside the graphite nozzle, space-averaged fuel regression rate and nozzle throat diameter were measured. The results allowed for the investigation of different issues related to hybrid rockets (e.g., fuel regression rate, engine performance, nozzle ablation under different conditions). The focus was mainly directed to the nozzle heat transfer, through the reconstruction of the convective heat transfer coefficient for different tests in the 70 mm grain length engine configuration. The reconstruction took advantage of the experimental data provided by the nozzle embedded thermocouple. Then, the experimental convective heat transfer coefficient was used to validate the results from some empirical correlations. The results showed significant differences between the experimental convective heat transfer coefficients when considering tests with different oxidizer mass flow rates. Furthermore, the predictions from the empirical correlations proved to be more reliable only in cases characterized by oxidizer-rich conditions.