Experimental Investigation and Computational Fluid Dynamic Simulation of Hydrodynamics of Liquid–Solid Fluidized Beds

Abstract

The present study provides and examines an experimental and CFD simulation to predict and accurately quantify the individual phase holdup. The experimental findings demonstrated that the increase of solid beads has a significant influence on the (Umf), as comparatively small glass beads particles require a low (Umf) value, which tends to increase as the diameter of the beads increases. Besides that, the expansion ratio is proportional to the velocity of the liquid. Even though, the relationship becomes inversely proportional to the diameter of the beads. The liquid holdup was found to increase with increasing liquid velocity, however, the solid holdup decreased. The Eulerian–Eulerian granular multiphase flow technique was used to predict the overall performance of the liquid–solid fluidized beds (LSFBs). There was a good agreement between the experimental results and the dynamic properties of liquid–solid flows obtained from the CFD simulation, which will facilitate future simulation studies of liquid–solid fluidized beds. This work has further improved the understanding and knowledge of CFD simulation of such a system at different parameters. Furthermore, understanding the hydrodynamics features within the two-phase fluidization bed, as well as knowing the specific features, is essential for good system design, enabling the systems to perform more effectively.