Power Receiving Unit for High-Power Resonant Wireless Power Transfer

Abstract

A new power receiving unit (PRU) is proposed in this paper for resonant wireless power transfer (WPT), which is characterized by the capability of attracting high power from the power transmitting unit (PTU). The resonant WPT is designed for delivering the electrical power to the PRU attached on an electrical vehicle (EV) chassis 50 cm away from a PTU installed on the ground. The proposed PRU uses only the passive elements such as inductors, diodes, and capacitors, which need no initial power from the EV. It is then applicable for charging a battery to several hundred volts for even a first-time charging battery. For a resonant WPT at a switching frequency of 4 MHz, the proposed PRU behaves as a negative impedance converter (NIC) itself in the subharmonics of 4 MHz. The NIC effect plus the subharmonic oscillation causes an instability current charging the battery connected to the PRU. In this paper, we simulated the PRU and performed the experiment. The experiment demonstrated a battery charging of 150 W from 50 cm away using three D-mode GaN HEMT transistors via the instability current ramp. The power transfer efficiency (PTE) improved as the power delivered to the load (PDL) increased. The peak PTE was 65% in the present findings. The simulation analysis showed that the circuit allowed itself be used to much higher power transfer when it is implemented with more GaN HEMT transistors connected in parallel. The theoretical derivation of the PRU circuit is also used to support both the experimental and simulation results.