Preparation of Tannic Acid/Hyaluronic Acid Coating to Improve the Corrosion Resistance of Implant Material Based on AZ31B Magnesium Alloy

Abstract

Magnesium (Mg) has good biocompatibility, making it suitable as an implant material. However, Mg has a high corrosion rate because of the reaction between magnesium implants and fluids in the human body. To lower the corrosion rate of magnesium alloys, it is necessary to perform a coating process using tannic acid (TA) and hyaluronic acid (HYA), as we have done in this study. TA, an active ingredient, is relatively inexpensive, easy to find, and can effectively reduce the degradation rate. SEM characterization showed that the TA–HYA layer was formed by chelation between the Mg and TA surfaces. Furthermore, adding HYA to the coating covered the cracks caused by the TA layer and increased the hydrophilic properties. In vitro corrosion tests using Tafel polarization showed that the TA–HYA coating reduced the corrosion rate of the magnesium alloy from 7.379 mm/year to 0.204 mm/year. The immersion test in the SBF solution showed that the TA–HYA layer could bind Mg2+, which is beneficial for new bone growth.