Abstract
In this paper, the related experiments were carried out on microcapsules, with the aim of making the prepolymer react with the core emulsion by in situ polymerization using urea–formaldehyde resin as the wall material and waterborne acrylic wood coating as the core material. The prepared microcapsules were added to the waterborne acrylic wood coating and brushed on wood boards. Then, the gloss, hardness, adhesion, impact resistance and color difference were compared with paint surfaces without microcapsules. When the ratio of the microcapsule core-to-wall material was different from the increase in microcapsule content, the gloss of the coating decreased continuously; the decreasing range was basically the same, and the gloss values of the three core-wall ratio microcapsules were rather similar. With the increase in microcapsule content, the impact resistance of the coating first increased and then decreased. With the increase in microcapsule content, the color difference of the coating also increased continuously. The color difference of the coating with a microcapsule core-wall ratio of 0.67 changed the least, and the coating performance was good. When the core-wall ratio of the microcapsules was 0.67, and the proportion of microcapsules in the paint was 7.0%, the comprehensive properties of this coating were good. This research is of great significance to the future protection and development of wood.
Funder
Natural Science Foundation of Jiangsu Province
Youth Science and Technology Innovation Fund of Nanjing Forestry University
Subject
Materials Chemistry,Surfaces, Coatings and Films,Surfaces and Interfaces
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献