Affiliation:
1. Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013, China
2. Key Laboratory of Light-Duty Gas Turbine, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China
3. University of Chinese Academy of Sciences, Beijing 100049, China
Abstract
This paper focuses on the dynamic internal flow in the integrated aggressive intermediate turbine duct (AITD) with different HPT wake numbers, using CFX Solver with dynamic Reynolds-averaged Navier–Stokes equations (RANS), the shear stress transmission κ-ω turbulence model (SST) and the γ-θ transition model. The HPT wakes are simulated using sweeping rods, with the number of rods ranging from 14 to 56 and a reduced frequency of 1.07. The increasing wake number reduces the radial pressure gradient in the integrated AITD, and then decelerates the radial migration and dissipation of wake vortices, so that some residual wakes can reach the integrated low-pressure turbine guide vane (LPT-GV) to enhance the suppression of flow separation to a certain extent. On the other hand, the increase in wake number can also weaken the skewness and stretching of the wake, thereby increasing the duration of flow separation suppression. When there are too many wakes, the mixing between adjacent wakes accelerates the dispersion of wake vortices, leading to increased total pressure loss and an enhanced turbulence intensity. This enhanced turbulence intensity promotes bypass transition on the suction surface of the LPT-GV in advance, thereby completely eliminating flow separation on the LPT-GV in the entire spatiotemporal domain, which is beneficial for reducing separation loss, but also increasing turbulent viscous loss. When N ≤ 28, the gross loss of the integrated AITD studied in this paper reaches a minimum value (around 0.22), as the benefits brought by the wake suppression of flow separation can offset the wake dissipation loss and the turbulent viscous loss caused by the wake-induced transition. Considering that wake loss is inherently present, using sweeping wakes to inhibit the flow separation on the integrated LPT-GV can bring certain aerodynamic benefits when the wake number is less than 28.
Funder
National Science and Technology Major Project
Subject
Electrical and Electronic Engineering,Industrial and Manufacturing Engineering,Control and Optimization,Mechanical Engineering,Computer Science (miscellaneous),Control and Systems Engineering
Reference26 articles.
1. The Influence of Blade Wakes on the Performance of Inter-turbine Diffusers;Dominy;J. Turbomach.,1996
2. Flow Development through Inter-turbine Diffusers;Dominy;J. Turbomach.,1998
3. Bailey, D.W., and Carrotte, J.F. (1996). Turbo Expo: Power for Land, Sea, and Air, American Society of Mechanical Engineers.
4. Arroyo Osso, C., Wallin, F., and Johansson, T.G. (2008, January 18–21). Experimental and Numerical Investigation of an Aggressive Intermediate Turbine Duct: Part 2-Flowfield under Off-Design Inlet Conditions. Proceedings of the 26th AIAA Applied Aerodynamics Conference, Honolulu, HI, USA.
5. Development of a turning mid turbine frame with embedded design—Part I: Design and steady measurements;Spataro;J. Turbomach.,2014