Abstract
In order to ensure stable grid operatiFon and improve power quality, active or passive load rejection of pumped storage power stations (PSPS) inevitably occurs from time to time. The rapid closing of the guide vanes will cause drastic changes in pressure pulsations in the flow channel of the pump-turbine (PT) unit. The high-level pressure pulsations during load rejection transfer to the entire flow passage of the PT unit and generate strong vibrations on the head-cover and the connecting bolts. In this study, the 1D/3D joint simulation of the pipeline in a pumped storage power station and the turbine flow channels including the flow domains of the runner, crown chamber, band chamber, upper and lower labyrinths and pressure balance tubes is carried out first. Then, by applying the calculated pressure loads on the head-cover, stay vanes and bottom ring of the PT unit, the flow-induced dynamic behavior of the structures including the head-cover bolts is analyzed in detail. The results demonstrate that pressure loads on head-cover bolts change dramatically during the load rejection process. The flow-induced deformation of the inner head-cover during the load rejection is larger than that of other structures, and the flow-induced displacement and stress of different head-cover bolts are not uniform. The achieved conclusions in this study can be a useful reference for the design and operation of head-cover bolts for other PT units and high-head Francis turbine units.
Funder
State key Laboratory of Hydroscience and Engineering and Tsinghua—Ningxia Yinchuan Joint Institute of Internet of Waters on Digital Water Governance
National Natural Science Foundation of China
Subject
Electrical and Electronic Engineering,Industrial and Manufacturing Engineering,Control and Optimization,Mechanical Engineering,Computer Science (miscellaneous),Control and Systems Engineering
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献