Exhaust Gas Characteristics According to the Injection Conditions in Diesel and DME Engines

Abstract

In this paper, the effect of high-pressure injection pressure on particulate matter (PM) and nitrogen oxide (NOx) emissions is discussed. Many studies have been conducted by active researchers on high-pressure engines; however, the problem of reducing PM and NOx emissions is still not solved. Therefore, in the existing diesel (compression ignition) engines, the common rail high-pressure injection system has limitations in reducing PM and NOx emissions. Accordingly, to solve the exhaust gas emission problem of a compression ignition engine, a compression ignition engine using an alternative fuel is discussed. This study was conducted to optimize the dimethyl ether (DME) engine system, which can satisfy the emission gas exhaust requirements that cannot be satisfied by the current common rail diesel compression ignition engine in terms of efficiency and exhaust gas using DME common rail compression ignition engine. Based on the results of this study on diesel and DME engines under common rail conditions, the changes in engine performance and emission characteristics of exhaust gases with respect to the injection pressure and injection rate were examined. The emission characteristics of NOx, hydrocarbons, and carbon monoxide (CO) emissions were affected by the injection pressure of pilot injection. Under these conditions, the exhaust gas characteristics were optimized when the pilot injection period and needle lift were varied.