Simplified Elastoplastic Fatigue Correction Factor Analysis Approach Based on Minimum Conservative Margin

Abstract

ASME and RCC-M codes specify an elastoplastic fatigue analysis technique: a simplified elastoplastic fatigue analysis method based on linear elastic analysis. In this method, the elastic strain range is multiplied by the elastoplastic correction factor (Ke) to envelope the actual plastic strain range for fatigue evaluation. The ASME or RCC-M provide the Ke parameters of typical materials, such as austenitic stainless steel and low alloy steel. However, how can the parameters of the material not included in the codes be determined? Based on the existing material Z2CND18.12 (nitrogen control) in the codes and taking into account various sensitive factors, the minimum conservative margin of Ke for this material is calculated, and then the parameters of nonstandard materials are determined iteratively based on the conservative margin. The sensitive factors include the different structure model, load types, the loading control mode, temperature value and the material constitutive model. Based this approach, the Ke parameters of TA16 are determined and verified by the transient with drastic change in temperature and pressure. The results of the case show that the simplified elastoplastic fatigue analysis can envelope the results of cyclic plastic fatigue analysis. The minimum margin approach established in this paper can reasonably determine the Ke value of materials beyond the ASME and RCC-M codes.