The Influence of Initial Purity Level on the Refining Efficiency of Aluminum via Zone Refining

Abstract

Zone refining is a well-known technique, usually using pure initial materials to produce high purity metals. However, the effectiveness of zone refining in the purification of different purity levels of metals as well as its feasibility for use as a recycling technique for low quality metals are rarely investigated. In this work, conducted at IME/RWTH Aachen University, three kinds of Al with different purities, i.e., three-layer electrolysis (4N), commercial pure (2N8) and recycled Al (1N7), were put on focus to address the above-mentioned issue. The experiments were conducted with an optimized zone length combination at the moving rate of 1.2 mm/min for five zone passes. The results showed that the 4N pure initial Al was improved to 5N5 after five passes, much higher than the results for commercial pure- or recycled Al, where less than 50% reduction of total impurities was achieved.