Integrated Active and Reactive Power Control Methods for Distributed Energy Resources in Distribution Systems for Enhancing Hosting Capacity

Abstract

Recently, there has been a significant increase in the integration of distributed energy resources (DERs) such as small-scale photovoltaic systems and wind turbines in power distribution systems. When the aggregated outputs of DERs are combined, excessive reverse current may occur in distribution lines, leading to overvoltage issues and exceeding thermal limits of the distribution lines. To address these issues, it is necessary to limit the output of DERs to a certain level, which results in constraining the hosting capacity of DERs in the distribution system. In this paper, coordination control methodologies of DERs are developed and executed to mitigate the overvoltage and overcurrent induced by DERs, thereby increasing the hosting capacity for DERs of the distribution system. This paper proposes three coordinated approaches of active and reactive power control of DERs, namely Var Precedence, Watt Precedence, and Integrated Watt and Var Control. The Var and Watt Precedence prioritizes reactive power for voltage (Q–V) and active power for current (P–I) to address network congestion, thereby enhancing hosting capacity. Conversely, the Integrated Var and Watt Precedence propose a novel algorithm that combines four control indices (Q–V, P–V, Q–I, and P–I) to solve network problems while maximizing hosting capacity. The three proposed methods are based on the sensitivity analysis of voltage and current to the active and reactive power outputs at the DER installation locations on the distribution lines, aiming to minimize DER active power curtailment. Each sensitivity is derived from linearized power equations at the operating points of the distribution system. To minimize the computation burden of iterative computation, each proposed method decouples active and reactive power and proceeds with sequential control in its own unique way, iteratively determining the precise output control of distributed power sources to reduce linearization errors. The three proposed algorithms are verified via case studies, evaluating their performance compared to conventional approaches. The case studies exhibit superior control effectiveness of the proposed DER power control methods compared to conventional methods when issues such as overvoltage and overcurrent occur simultaneously in the distribution line so that the DER hosting capacity of the system can be improved.