Parameter Study on Friction Surfacing of AISI316Ti Stainless Steel over EN8 Carbon Steel and Its Effect on Coating Dimensions and Bond Strength

Abstract

Friction surfacing is a solid-state coating process that uses plastic deformation to improve the efficiency of the core metallic pattern, resulting in fine-grained coatings with superior wear and corrosion properties. This article focuses on the development of inherently homogeneous, non-diluted coating of AISI316Ti stainless steel above EN8 and also encloses the empirical relationship for the prediction of bond strength (Bs), coating thickness (Ct), and coating width (Cw). The key individualities for bonding geometry were believed to be the process parameters such as rotational speed (rpm), traverse speed (mm/s), and axial load (kN). The effect of input parameters on the bond’s external dimensions and strength was investigated using a multi-objective optimization approach through experimentation. The bond’s strength improved as the coating thickness was reduced and the coating width was increased. The grain-refined coatings superimposing martensitic microstructure with no deposition of carbide particles added value to the metallurgical study using the scanning electron microscope.