Compositional and Microstructural Investigations of Prehistoric Ceramics from Southern Romania (Middle Neolithic Pottery)

Author:

Ion Rodica-Mariana123ORCID,Pungoi Ancuta-Elena4ORCID,Iancu Lorena1,Grigorescu Ramona Marina1ORCID,Vasilievici Gabriel1,Gheboianu Anca Irina5ORCID,Slamnoiu-Teodorescu Sofia6,Alexandrescu Elvira1

Affiliation:

1. National Institute for Research & Development in Chemistry and Petrochemistry—ICECHIM, 202 Spl. Independentei, 060021 Bucharest, Romania

2. Doctoral School of Materials Engineering Department, Valahia University of Targoviste, 35 Lt. Stancu Ion, 130105 Targoviste, Romania

3. Academy of Romanian Scientists, Ilfov Street 3, 050044 Bucharest, Romania

4. Argeș County Museum, 44 Armand Călinescu, Piteşti, 110047 Argeş, Romania

5. Institute of Multidisciplinary Research for Science and Technology, Valahia University of Targoviste, 13 Aleea Sinaia, 130004 Targoviste, Romania

6. Materials Engineering and Mechanics Department, Valahia University, 13 Aleea Sinaia, 130004 Targoviste, Romania

Abstract

In this paper, based on our previous expertise on ceramic artifacts, several archaeometric methods applied to some samples collected from the Dudești archaeological site (Oltenia region, Romania) are reported for the first time in the literature. The chemical composition, and microstructural and morphological characterization of these samples offer important conclusions about the processing conditions. Some specific techniques such as X-ray diffraction (XRD), wavelength-dispersive X-ray fluorescence (WDXRF), optical microscopy (OM), stereomicroscopy, environmental scanning electron microscopy (ESEM), Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy provide compositional information about composition and the decay processes. Additionally, the Brunauer–Emmett–Teller (BET) method helps to estimate pore sizes and specific surface areas. A thermogravimetric analysis (TGA/TDG) was used to establish details regarding the production technology and also the raw materials source used to make the ceramics. The obtained results indicated that the ceramics are based on a paste of muscovite and feldspar, with high plasticity, together with quartz and hematite/goethite and calcite, the latter in very low concentrations. According to the obtained results, we could assume that clays from the investigated samples had a low concentration of calcium. Gypsum is present as paste in a very low concentration, identified by the presence of a sulphate group in WDXRF. In the same context, iron oxides have a significant impact on the firing atmosphere of iron-rich clay, resulting in blackening under reducing conditions and a reddish coloration under oxidative conditions. The use of hematite and gypsum as pigments further contributes to the color variations in the pottery. The consistent firing temperature range of 200–600 °C in Dudești pottery implies a standardized production process, the variation in color being dependent on the specific reducing/oxidative regime conditions (reducing atmosphere followed by rapid oxidation). This relationship between clay composition and local sources suggests a connection to Neolithic pottery production in the region and their color depending on the reducing/oxidative regime conditions.

Funder

Ministry of Research, Innovation and Digitization

Publisher

MDPI AG

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3