Affiliation:
1. School of Mechanical Engineering, Nanjing Institute of Technology, Nanjing 211167, China
Abstract
The vibration of the micro-milling tool presents a significant chaotic vibration phenomenon, which has a great influence on the tool life and part machining precision, and is one of the basic problems restricting the improvement of machining efficiency and machining accuracy in micro-milling. To overcome the difficulty of the traditional vibration measurement method with the online measurement of micro-milling tool multi-dimensional vibration, a three-dimensional (3D) measurement method of the micro-milling tool is proposed based on multi-fiber array coding, which converts the tool space motion into a decoding process of the optical coding array employing the tool modulating the multi-fiber array encoding. A 6 × 6 optical fiber array was designed, and a 3D motion platform for micro-milling tools was built to verify the characteristics of the optical fiber measurement system. The measurement results show that the measuring accuracy of the system reached 1 µm, and the maximum linear error in x-, y-, and z-direction are 1.5%, 2.58%, and 2.43%, respectively; the tool space motion position measurement results show that the maximum measurement error of the measuring system was 3.4%. The designed system has unique coding characteristics for the tool position in the space of 100 µm3. It provides a new idea and realization means for the online vibration measurement of micro-milling tools.
Funder
Innovation Fund of Nanjing Institute of Technology
Subject
Electrical and Electronic Engineering,Mechanical Engineering,Control and Systems Engineering
Reference41 articles.
1. Micro milling process modeling: A review;Mamedov;Manuf. Rev.,2021
2. A review on micro-milling: Recent advances and future trends;Geier;Int. J. Adv. Manuf. Technol.,2021
3. Study on frequency response and bifurcation analyses under primary resonance conditions of micro-milling operations;Mokhtari;Appl. Math. Model.,2020
4. Analysis of Burr Formation in Low Speed Micro-milling of Titanium Alloy (Ti-6Al-4V);Rehman;Mech. Sci.,2018
5. A comparative study on the effectiveness of TiN, TiCN, and AlTiN coated carbide tools for dry micro-milling of aluminium, copper and brass at low spindle speed;Jahan;Int. J. Mach. Mach. Mater.,2018
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献