Technological Properties of Inulin-Enriched Doughs and Breads, Influence on Short-Term Storage and Glycemic Response

Abstract

The use of inulin in food is highly appreciated by consumers because of its prebiotic effect. In this study, the effects of increasing additions (5, 10 and 20%) of inulin as a substitute for wheat flour in bread production were investigated with regard to the physical, technological and rheological properties of the flour blends. Inulin reduced the water-binding capacity from 1.4 g/100 g with 0 flour to 0.80 g/100 g with the 20% inulin addition, while there were no statistical differences in the oil-binding capacity. The addition of inulin also influenced the yeast rates, especially in the samples with 5 and 10% addition. On the farinograph, inulin caused a reduction in water absorption (40.75 g/100 g with 20% inulin), an increase in dough development time (18.35 min with 10% inulin) and dough stability (13.10 min with 10% inulin). The mixograph showed a longer kneading time for the sample with 20% inulin (8.70 min) than for the control (4.61 min). In addition, there was an increase in dough firmness and tightness due to the addition of inulin (W: 203 × 10−4 J; P/L: 4.55 for the 20% inulin sample) compared with the control. The physical and technological properties of the loaves were evaluated at time 0 and after 4 days (T4). The addition of inulin reduced the volume of the bread while increasing the weight, albeit with a weight loss at T4 (compared to T0) of 4.8% for the 20% inulin and 14.7% for the control. The addition of inulin caused a darkening of the crust of the enriched bread, proportional to the increase in inulin content. In addition, the inulin content ranged from 0.82 g/100 g in the control to 14.42 g/100 g in the 20% inulin bread, while the predicted glycemic index ranged from 94.52 in the control to 89.39 in the 20% inulin bread. The available data suggest that the formulation with 5% inulin provides the highest performance.