Affiliation:
1. Department of Metallurgical Technologies, Faculty of Materials Science and Technology, VSB-Technical University of Ostrava, 17. Listopadu 2172/15, 708 00 Ostrava, Czech Republic
Abstract
The constant effort of all metal alloy manufacturing technologies and processes is to improve the resulting quality of the processed part. Not only the metallographic structure of the material is monitored, but also the final quality of the cast surface. In foundry technologies, in addition to the quality of the liquid metal, external influences, such as the behaviour of the mould or core material, significantly affect the cast surface quality. As the core is heated during casting, the resulting dilatations often lead to significant volume changes causing stress foundry defects such as veining, penetration and surface roughness. In the experiment, various amounts of silica sand were replaced with artificial sand and a significant reduction in dilation and pitting of up to 52.9% was observed. An important finding was the effect of the granulometric composition and grain size of the sand on the formation of surface defects from brake thermal stresses. The specific mixture composition can be considered as an effective prevention against the formation of defects instead of using a protective coating.
Funder
MEYS
student grant competition
Subject
General Materials Science
Reference41 articles.
1. Microstructural aspects of new grade ODS alloy consolidated by rotary swaging;Kocich;Mater. Charact.,2021
2. Kunčická, L., Kocich, R., Benč, M., and Dvořák, J. (2022). Affecting Microstructure and Properties of Additively Manufactured AISI 316L Steel by Rotary Swaging. Materials, 15.
3. Kořínek, M., Halama, R., Fojtík, F., Pagáč, M., Krček, J., Krzikalla, D., Kocich, R., and Kunčická, L. (2021). Monotonic Tension-Torsion Experiments and FE Modeling on Notched Specimens Produced by SLM Technology from SS316L. Materials, 14.
4. Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion;Kocich;Addit. Manuf.,2022
5. A contribution to study of processes on the steel cast–sand mould contact surface during casting;Mater. Lett.,2000
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献