Physical Activation of Wooden Chips and the Effect of Particle Size, Initial Humidity, and Acetic Acid Extraction on the Properties of Activated Carbons

Abstract

In this research study, two different wooden biomasses (birch and pine) were thermally carbonized and steam-activated into activated carbons in a one-stage process. The effects of particle size and humidity (as received and oven-dried) on the properties, such as specific surface areas, pore volumes, and pore size distributions, of the final activated carbon characteristics were examined. Another set of biomasses (birch, spruce, and pine) was pre-treated before carbonization and the activation steps through an extractive process using a weak acetic acid in Soxhlet extractors. According to the results, the dried samples had a slightly lower surface area, while no difference was observed in the yields. For the extracted samples, there was a significant difference, especially in the pore size distributions, compared to the non-extracted samples. There appeared to be a shift from a meso-microporous distribution to a microporous distribution caused by the extractive pre-treatment.