Physical, Morphological, and Rheological Properties of Agglomerated Milk Protein Isolate Powders: Effect of Binder Type and Concentration

Abstract

Milk protein isolate powder (MPIP), a high protein-based powder, is a common dietary ingredient but has poor physical properties due to its cohesive nature. Powder agglomeration is one of the most widely used methods to improve and modify the quality of MPIP structures. In this study, the physical, morphological, and rheological properties of MPIPs agglomerated in a fluidized-bed agglomeration process were investigated as a function of sugar binder type and concentration. The physical properties of MPIP were evaluated by their flowability, cohesiveness, porosity, particle size distribution (PSD), and water-holding properties (wettability, solubility, and water-binding capacity). The density values of the agglomerated MPIPs decreased with increasing the binder concentration, whereas the porosity, wettability, and solubility values increased. Such trends were consistent with SEM observations. The MPIP agglomerated with 10% sorbitol had the largest particle diameter (D50) and showed better physical properties compared to the other sugar binders. The viscosity values (ηa,50) of the MPIPs agglomerated with sugar binders showed lower values than the control (no sugar binder). The agglomeration process enhanced the viscoelasticity of the MPIP, but the viscoelasticity decreased with increasing the sugar binder concentration. These observations suggested that the physical, morphological, and rheological properties of MPIP can be greatly affected by the binder type and concentration in the agglomeration process.