Affiliation:
1. Electrical and Computer Engineering Department, Auburn University, Auburn, AL 36849, USA
Abstract
Presented in this article is a permanent magnet synchronous motor (PMSM) control under open-circuit fault (OCF) operation using field-oriented control (FOC) with independent speed and flux controllers. The independent control allows the motor to operate efficiently under varying conditions. A simplified control approach is employed to control the PMSM under the OCF situation; the actual flux and torque of the PMSM are directly measured by the stator currents, eliminating the need for estimators or phase-locked-loop (PLL) systems. Matlab/Simulink is employed for the simulation, while hardware experiments are conducted using a dSPACE DS1104. The simulation and the hardware results demonstrate the control method’s effectiveness in maintaining continuous motor operation during OCF, its robustness against OCF conditions, and its ability to adapt under varying conditions, including speed, flux, and load torque change.
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction