Abstract
Equations of state are powerful tools for modeling thermophysical properties; however, so far, these have not been developed for shale oil due to a lack of experimental data. Recently, new experimental data were published on the properties of Kukersite shale oil, and here we present a method for modeling the properties of the gasoline fraction of shale oil using the PC-SAFT equation of state. First, using measured property data, correlations were developed to estimate the composition of narrow-boiling-range Kukersite shale gasoline samples based on the boiling point and density. These correlations, along with several PC-SAFT equations of the states of various classes of compounds, were used to predict the PC-SAFT parameters of aromatic compounds present in unconventional oil-containing oxygen compounds with average boiling points up to 180 °C. Developed PC-SAFT equations of state were applied to calculate the temperature-dependent properties (vapor pressure and density) of shale gasoline. The root mean square percentage error of the residuals was 13.2%. The average absolute relative deviation percentages for all vapor pressure and density data were 16.9 and 1.6%, respectively. The utility of this model was shown by predicting the vapor pressure of various portions of the shale gasoline. The validity of this model could be assessed for oil fractions from different deposits. However, the procedure used here to model shale oil gasoline could also be used as an example to derive and develop similar models for oil samples with different origins.
Subject
General Materials Science