Numerical Simulation of Non-Isothermal Mixing Flow Characteristics with ELES Method

Abstract

Thermal fatigue caused by turbulent thermal mixing in tee pipes is always one of the failure factors of industrial pipes. At present, computational fluid dynamics (CFD) is still the main research method to study the thermal fatigue mechanism. Due to the limitations of the large eddy simulation (LES) model and the classical Reynolds Averaged Navier–Stokes (RANS) model in simulating thermal mixing, an advanced Embedded LES (ELES) model was developed. By comparing the model with data in the open literature, the validity of the ELES model to iso-thermal mixing was evaluated and proven. After that, the flow characteristics of the backflow upstream with different momentum ratios (MR) were studied using the ELES method, as well as the temperature characteristics near the wall where the backflow appears. It was found that the characteristics of the backflow and the temperature distribution upstream in the tee were different with different MR values and some regions under specified MR values are found to be more prone to thermal fatigue at the intersection of the tee upstream. Moreover, the frequency analysis at specified points near the wall under three different MR values was estimated to evaluate thermal fatigue and the results showed that long-period fluctuations of lower frequencies than 6 Hz upstream were observed. This work helps form a comprehensive understanding of the backflow in thermal mixing and the relationship between fatigue and backflow in the tee.