Test Studies on Geogrid–Soil Interface Behavior under Static and Dynamic Loads

Abstract

Pullout tests on geogrids have been regarded as the most direct way to investigate geogrid–soil interaction. In the pullout tests on geogrids, either static or dynamic load is commonly used for applying the vertical loads. In order to investigate the influence of static and dynamic load on pullout test results, pullout tests are carried out to analyze the mechanical response of geogrids and soils under static and dynamic load from the large-scale pullout tester. The results show that frequency and amplitude have significant effects on the pullout test results under the dynamic load. The interface cohesion and friction coefficients under dynamic loads are smaller than those under static loads. The reinforcement effect of geogrids is reduced by dynamic load. Therefore, the strength of geogrids should be reduced when quasi-static analysis is used for reinforced structures. Knockdown factor is recommended for the corresponding reduction. The investigation results of this study may provide scientific references for regulating the design method of reinforced structures.