Abstract
Emerging applications in fields such as extended reality require both a high throughput and low latency. The millimeter-wave (mmWave) spectrum is considered because of the potential in the large available bandwidth. The present work studies mmWave Wi-Fi physical layer latency management mechanisms, a key factor in providing low-latency communications for time-critical applications. We calculate physical layer latency in an ideal scenario and simulate it using a tailor-made simulation framework, based on the IEEE 802.11ad standard. Assessing data reception quality over a noisy channel yielded latency’s dependency on transmission parameters, channel noise, and digital baseband tuning. Latency in function of the modulation and coding scheme was found to span 0.28–2.71 ms in the ideal scenario, whereas simulation results also revealed its tight bond with the demapping algorithm and the number of low-density parity-check decoder iterations. The findings yielded tuning parameter combinations for reaching Pareto optimality either by constraining the bit error rate and optimizing latency or the other way around. Our assessment shows that trade-offs can and have to be made to provide sufficiently reliable low-latency communication. In good channel conditions, one may benefit from both the very high throughput and low latency; yet, in more adverse situations, lower modulation orders and additional coding overhead are a necessity.
Funder
H2020 Marie Skłodowska-Curie Actions
H2020 Research and Innovation Actions
Subject
Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献