Author:
Ma Binjian,Shin Donghyun,Banerjee Debjyoti
Abstract
Molten salts mixed with nanoparticles have been shown as a promising candidate as the thermal energy storage (TES) material in concentrated solar power (CSP) plants. However, the conventional method used to prepare molten salt nanofluid suffers from a high material cost, intensive energy use, and laborious process. In this study, solar salt-Al2O3 nanofluids at three different concentrations are prepared by a one-step method in which the oxide nanoparticles are generated in the salt melt directly from precursors. The morphologies of the obtained nanomaterials are examined under scanning electron microscopy and the specific heat capacities are measured using the temperature history (T-history) method. A non-linear enhancement in the specific heat capacity of molten salt nanofluid is observed from the thermal characterization at a nanoparticle mass concentration of 0.5%, 1.0%, and 1.5%. In particular, a maximum enhancement of 38.7% in specific heat is found for the nanofluid sample prepared with a target nanoparticle mass fraction of 1.0%. Such an enhancement trend is attributed to the formation of secondary nanostructure between the alumina nanoparticles in the molten salt matrix following a locally-dispersed-parcel pattern. These findings provide new insights to understanding the enhanced energy storage capacity of molten salt nanofluids.
Subject
General Materials Science,General Chemical Engineering
Reference60 articles.
1. Concentrating Solar Power Global Outlook 09https://www.greentechmedia.com/images/wysiwyg/News/Greenpeace_concentratingsolarpower2009.pdf
2. State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization
3. Evaluation of ionic liquids as heat transfer materials in thermal storage systems;Zhang;Mater. Sci. Technol. AIST,2007
Cited by
19 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献