Compressive Properties of Cross-Laminated Timber Panels Made of Hardwood Tree Species from the Appalachian Region-Reference-Cited by-同舟云学术

Compressive Properties of Cross-Laminated Timber Panels Made of Hardwood Tree Species from the Appalachian Region

Published:2023-03 Issue:1 Volume:29 Page:
ISSN:1076-0431
Container-title:Journal of Architectural Engineering
language:en
Short-container-title:J. Archit. Eng.

Author:

Palacio-Betancur Alejandro¹^ORCID,Hormozabad Sajad Javadinasab²,Niman Chad³^ORCID,Masterson Paul⁴,Sturlaugson Brent⁵^ORCID,Brewer Joseph⁶,Swetnam Bruce⁷,Bryson L. Sebastian⁸,Soto Mariantonieta Gutierrez⁹^ORCID

Affiliation:

1. Ph.D. Student, Dept. of Civil and Environmental Engineering, The Pennsylvania State Univ., 212 Sackett Building, University Park, PA 16802. ORCID: .

2. Dept. of Civil Engineering, Univ. of Kentucky, 161 Raymond Building, Lexington, KY 40506.

3. Primary Forest Products Specialist, Dept. of Forestry and Natural Resources, College of Agriculture, Food and Environment, Thomas Poe Cooper Building, 730 Rose St., Lexington, KY 40546. ORCID: .

4. Wood Shop Coordinator, School of Art and Visual Studies, Univ. of Kentucky, 202 Fine Arts Building, 465 Rose St., Lexington, KY 40506.

5. Assistant Professor, School of Architecture and Planning, Morgan State Univ., 1700 E. Cold Spring Lane, Baltimore, MD 21251. ORCID: .

6. Director of Technology and Facilities, College of Design, Univ. of Kentucky, 112 Pence Hall, Lexington, KY 40506.

7. Kentuckiana Masonry Institute Endowed Professor, College of Design, Univ. of Kentucky, 112 Pence Hall, Lexington, KY 40506.

8. Hardin-Drnevich-Huang Professor, Dept. of Civil Engineering, Univ. of Kentucky, 161 Raymond Building, Lexington, KY 40506.

9. Assistant Professor, School of Engineering Design and Innovation, The Pennsylvania State Univ., 213 Hammond Building, University Park, PA 16802 (corresponding author). ORCID: .

Publisher

American Society of Civil Engineers (ASCE)

Subject

Visual Arts and Performing Arts,Building and Construction,Civil and Structural Engineering,Architecture

Link

https://ascelibrary.org/doi/pdf/10.1061/JAEIED.AEENG-1441

Reference33 articles.

1. Potential of hardwood lumber in cross laminated timber in North America: A CLT manufacturer’s perspective;Adhikari S.;Mass Timber Construct. J.,2020

2. Current status of hardwood sawmills to produce structural grade hardwood lumber;Adhikari S.;Mass Timber Construct. J.,2020

3. Production and uses of yellow-poplar framing lumber;Allison R.;For. Prod. J.,1987

4. ASTM. 2020. Standard test method for evaluating properties of wood-based fiber and particle panel materials, 19428–12959. ASTM D1037-12. West Conshohocken, PA: ASTM.

5. Beagley, K. S. M., J. R. Loferski, D. P. Hindman, and J. C. Bouldin. 2014. “Investigation of hardwood cross-laminated timber design.” In Proc., World Conf., for Timber Engineering. Quebec: World Conference on Timber Engineering (WCTE).