Design Issues for Concrete Reinforced with Steel Fibers, Including Fibers Recovered from Used Tires-Reference-Cited by-同舟云学术

Design Issues for Concrete Reinforced with Steel Fibers, Including Fibers Recovered from Used Tires

Published:2006-10 Issue:5 Volume:18 Page:677-685
ISSN:0899-1561
Container-title:Journal of Materials in Civil Engineering
language:en
Short-container-title:J. Mater. Civ. Eng.

Author:

Neocleous K.¹²³,Tlemat H.¹²³,Pilakoutas K.¹²³

Affiliation:

1. Post-Doctoral Research Associate, Centre for Cement and Concrete, Dept. of Civil and Structural Engineering, Univ. of Sheffield, Sheffield S1 3JD, U.K. (corresponding author). E-mail: k.neocleous@sheffield.ac.uk

2. Senior Engineer, Buro Happold, 49 Newhall St., Birmingham B3 3QR, U.K. E-mail: tlemat@yahoo.com

3. Professor of Construction Innovation, Centre for Cement and Concrete, Dept. of Civil and Structural Engineering, Univ. of Sheffield, Mappin St., Sheffield S1 3JD, U.K. E-mail: k.pilakoutas@sheffield.ac.uk

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%290899-1561%282006%2918%3A5%28677%29

Reference18 articles.

1. Brite-Euram (2002a). “Definition of round robin test preparation of specimens. Execution and evaluation of round robin testing. Brite-Euram BRPR-CT98-0813: Test and design methods for steel fibre reinforced concrete.” Final Rep. of Sub-task 2.1 and 2.2 Project funded by the European Community under the Industrial & Materials Technologies Programme (Brite-Euram II) (2002) K.U. Leuven Research and Development Leuven Belgium.

2. Brite-Euram (2002b). “Brite-Euram BRPR-CT98-0813: Test and design methods for steel fibre reinforced concrete.” Subtask 7.2 Final Rep. Project funded by the European Community under the Industrial & Materials Technologies Programme (Brite-Euram II) K.U. Leuven Research and Development Leuven Belgium.

3. Department of Trade and Industry (DTI). (2001). “Demonstrating steel fibres from waste tyres as reinforcement in concrete.” Department of Trade and Industry: Partners in Innovation Contract: CI 39/3/684 cc2227 U.K.

4. Erdem E. (2003). “The flexural behaviour of SFRC beams and slabs: bending with σ-ϵ method.” Proc. RILEM TC 162-TDF Workshop on Test and Design Methods for Steel Fibre Reinforced Concrete—Background and Experiences RILEM Bochum Germany S.A.R.L 67–76.

5. European Commission. (2002). “Waste fibre recycling in concrete; Development of design guidelines: Improving human research potential and the socioeconomic knowledge base.” Marie Curie Individual Fellowship Contract : HPMF-CT-2002-01825 Brussels Belgium.

Cited by 85 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Experimental and numerical analysis of tunnel primary support using recycled, and hybrid fiber reinforced shotcrete;Structures;2024-05

2. Evaluation of environmental and economic compatibility of different types of segment linings based on the structural performance with some aggravating factors;Tunnelling and Underground Space Technology;2024-02

3. Effect of fibre length on the mechanical properties of SFRC using recycled Steel fibres;Construction and Building Materials;2024-02

4. Experimental Study on Flexural Performance of Recycled Steel Fiber Concrete Beams;Buildings;2023-12-07

5. Experimental investigation and analytical prediction of flexural behaviour of reinforced concrete beams with steel fibres extracted from waste tyres;Case Studies in Construction Materials;2023-12