Experimental Study of Flow and Heat Transfer in Granular Media-Reference-Cited by-同舟云学术

Experimental Study of Flow and Heat Transfer in Granular Media

Published:2024-04-05 Issue:5 Volume:47 Page:841-850
ISSN:0930-7516
Container-title:Chemical Engineering & Technology
language:en
Short-container-title:Chem Eng & Technol

Author:

Shahidin Zain Ul¹,Siraj Muhammad Shafiq²^ORCID

Affiliation:

1. Department of Chemical Engineering Pakistan Institute of Engineering and Applied Sciences (PIEAS) Islamabad Pakistan

2. Department of Metallurgy and Materials Engineering Pakistan Institute of Engineering and Applied Sciences (PIEAS) Room A‐223, Nilore Islamabad Pakistan

Abstract

AbstractIn this paper, granular flow is studied using particle image velocimetry (PIV) in two different geometries, that is, rectangular box and cylindrical bladed mixer. Effects of parameters like blade rake angle, bed height, moisture content, and the number of blades were studied. The shear rate and velocity magnitude of granular bed were calculated using PIV. The presence of moisture in the granular bed added additional cohesive forces and reduced shear rate between different layers of particles. Shear rate and shear forces were maximal at the tip of the blade. Temperature variations in the granular bed were measured experimentally and results were compared for static and mixing beds.

Publisher

Wiley

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/ceat.202100380

Reference49 articles.

1. Polydisperse granular flows in a bladed mixer: Experiments and simulations of cohesionless spheres

2. Studies on granular materials. IV. Calculation of the shaft torque for mixing granular materials

3. P.Peciar R.Fekete M.Peciar The force effect on the blade of the homogenizer in Int. Conf. of Slovak Society of Chemical Engineering Slovakia May2014 604–613.