Analysis of soft tissue integration‐supportive cell functions in gingival fibroblasts cultured on 3D printed biomaterials for oral implant‐supported prostheses

Author:

Rabel Kerstin1ORCID,Nath Amélie Joséphine12,Nold Julian1,Spies Benedikt C.1,Wesemann Christian1,Altmann Brigitte13,Adolfsson Erik4,Witkowski Siegbert1,Tomakidi Pascal2,Steinberg Thorsten2

Affiliation:

1. Department of Prosthetic Dentistry, Center for Dental Medicine, Medical Center–University of Freiburg, Faculty of Medicine University of Freiburg Freiburg Germany

2. Department of Oral Biotechnology, Center for Dental Medicine, Medical Center–University of Freiburg, Faculty of Medicine University of Freiburg Freiburg Germany

3. G.E.R.N Research Center for Tissue Replacement, Regeneration and Neogenesis, Department of Prosthetic Dentistry, Center for Dental Medicine, Medical Center–University of Freiburg, Faculty of Medicine University of Freiburg Freiburg Germany

4. Division Materials and Production–RISE Research Institutes of Sweden Mölndal Sweden

Abstract

AbstractTo date, it is unknown whether 3D printed fixed oral implant‐supported prostheses can achieve comparable soft tissue integration (STI) to clinically established subtractively manufactured counterparts. STI is mediated among others by gingival fibroblasts (GFs) and is modulated by biomaterial surface characteristics. Therefore, the aim of the present work was to investigate the GF response of a 3D printed methacrylate photopolymer and a hybrid ceramic‐filled methacrylate photopolymer for fixed implant‐supported prostheses in the sense of supporting an STI. Subtractively manufactured samples made from methacrylate polymer and hybrid ceramic were evaluated for comparison and samples from yttria‐stabilized tetragonal zirconia polycrystal (3Y‐TZP), comprising well documented biocompatibility, served as control. Surface topography was analyzed by scanning electron microscopy and interferometry, elemental composition by energy‐dispersive x‐ray spectroscopy, and wettability by contact angle measurement. The response of GFs obtained from five donors was examined in terms of membrane integrity, adhesion, morphogenesis, metabolic activity, and proliferation behavior by a lactate‐dehydrogenase assay, fluorescent staining, a resazurin‐based assay, and DNA quantification. The results revealed all surfaces were smooth and hydrophilic. GF adhesion, metabolic activity and proliferation were impaired by 3D printed biomaterials compared to subtractively manufactured comparison surfaces and the 3Y‐TZP control, whereas membrane integrity was comparable. Within the limits of the present investigation, it was concluded that subtractively manufactured surfaces are superior compared to 3D printed surfaces to support STI. For the development of biologically optimized 3D printable biomaterials, consecutive studies will focus on the improvement of cytocompatibility and the synthesis of STI‐relevant extracellular matrix constituents.

Publisher

Wiley

Cited by 1 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3