Affiliation:
1. State Key Laboratory of Powder Metallurgy Central South University Changsha 410083 China
2. Baosteel Research Institute Shanghai 201999 China
3. State Key Laboratory of Development and Application Technology of Automotive Steels Baosteel Shanghai 201999 China
Abstract
High‐manganese austenitic steels are one kind of superior materials applied in automotive lightweight industry because of their high strength and large plasticity. Herein, transmission electron microscopy and electron channeling contrast imaging combined with electron backscatter diffraction, etc. are used to analyze the microstructural evolution and dominant deformation mechanisms of a Fe–13.6Mn–1.2Al–0.6C (wt%) steel during tensile deformation. Due to the multiple‐stage strain hardening effect, this alloy exhibits excellent combination of strength and plasticity. The yield strength, ultimate tensile strength, and elongation reach 540 (±30) MPa, 1120 (±70) MPa, and 74 (±3)%, respectively. The early hardening stage is fully determined by dislocation accumulation and planar slip. With the strain increasing, the plastic deformation of the steel is dominated by twinning and microbanding, which lead to the synergetic effect of twinning‐induced plasticity and microband‐induced plasticity.
Funder
National Natural Science Foundation of China
Subject
Materials Chemistry,Metals and Alloys,Physical and Theoretical Chemistry,Condensed Matter Physics