Characterization and transport properties of ceramic filler incorporated natural rubber composites

Abstract

AbstractCrystalline glass–ceramic fillers were prepared from calcium carbonate, silica, alumina, and calcium fluoride by heating and subsequent quenching in cold water. The fillers were incorporated into natural rubber (1,4‐cis‐polyisoprene) and the filled rubber composites were crosslinked with sulfur in the presence of different rubber additives. The unfilled and filled rubber composites were characterized. The transport properties of benzene, toluene, and p‐xylene (BTX) through the rubber composites were studied in terms of sorption, diffusion, permeation, and mass transfer coefficients. The effect of the ceramic fillers on the mechanical, thermal and transport properties were studied. The sorption data at different temperatures were used for calculating activation energy of diffusion, permeation, free energy, and enthalpy of sorption. The BTX remained in the liquid state within the composite matrix as evident from negative ΔS. The diffusion coefficient (D) and mass transfer coefficient (kmtc) of BTX decreased with the increase in filler loading. Accordingly, for the transport of BTX the unfilled rubber showed a D (D × 107 cm2/s) and mass transfer coefficient (kmtc × 104 cm/s) of 5.67/3.97/2.96 and 7.71/7.08/7.04, respectively which decreased to 5.06/2.95/2.57 and 7.53/6.95/6.90, respectively for the composite containing 50 wt.% ceramic filler.