Duration and damping for ground motion characterization in frequency‐domain damage estimation of SDOF structures

Abstract

AbstractIn estimating the damage to a single‐degree‐of‐freedom (SDOF) structure due to multiple earthquake events, it may be convenient to use a frequency‐based approach, in which the anticipated ground motions are characterized through power spectral density functions (PSDFs) compatible with the specified design spectra for those motions. Since a spectrum‐compatible PSDF corresponds to a fictitious stationary ground motion process of a specified duration, the duration of this process should preferably be same as the length of the stationary segment in the actual ground acceleration process for a meaningful computation of the stochastic response. On assuming the strong‐motion segment of a given ground motion to represent its stationary segment, the nonstationarity of the strong‐motion segment is evaluated for the existing strong‐motion duration definitions. It is found that the Trifunac‐Brady definition is the most reasonable strong‐motion duration definition in respect of consistently giving the longest strong‐motion segment with least nonstationarity. Further, a spectrum‐compatible PSDF can be used for estimating the stochastic response of a linear system, provided the system has the same damping ratio as that of the design spectrum from which the PSDF has been computed. This causes errors in estimating the peak response of an equivalent linear system due to its damping ratio being higher than the initial damping ratio of the nonlinear system. To address this, an empirical expression is developed for the modified damping ratio of a linear system, which would lead to the correct peak response of the system on using the PSDF obtained from the 5%‐damping design spectrum.