Affiliation:
1. Joint School of National University of Singapore and Tianjin University International Campus of Tianjin University Binhai New City Fuzhou 350207 China
2. School of Chemical Engineering and Technology Key Laboratory for Green Chemical Technology of Ministry of Education Tianjin University Tianjin 300072 China
3. Collaborative Innovation Center of Chemical Science and Engineering (Tianjin) Tianjin 300072 China
4. Haihe Laboratory of Sustainable Chemical Transformations Tianjin 300192 China
Abstract
AbstractBiVO4 is one of the most promising candidates for photoelectrochemical water oxidation. However, the poor crystallinity and short hole diffusion length limit its charge separation. One bottleneck stems from the contradiction between high crystallinity and small particles via conventional furnace heating processes. This paper describes the design and fabrication of BiVO4 photoanodes via rapid thermal process (RTP), rather than furnace heating, to decouple the constraints between nucleation, crystallization, and growth processes of BiVO4. The higher heating ramp rate of RTP compared with furnace heating promotes the fast diffusion of reactant molecules, which elevates the nucleation rate above the particle growth rate of BiVO4, leading to small particles with high crystallinity. Moreover, the ultra‐high heating temperature makes it possible to crystallize the small BiVO4 particle within a short time. Thus, a high crystallinity can be obtained for the RTP‐treated BiVO4 while maintaining small particle size, achieving a charge separation efficiency of up to 82%, 30% higher than that of furnace‐treated BiVO4 photoanode.
Funder
National Key Research and Development Program of China
National Natural Science Foundation of China
China Postdoctoral Science Foundation
Project 211