Triaxial Residual Stress in Laser Powder Bed Fused 316L: Effects of Interlayer Time and Scanning Velocity-Reference-Cited by-同舟云学术

Triaxial Residual Stress in Laser Powder Bed Fused 316L: Effects of Interlayer Time and Scanning Velocity

Published:2022-01-17 Issue: Volume: Page:2101330
ISSN:1438-1656
Container-title:Advanced Engineering Materials
language:en
Short-container-title:Adv Eng Mater

Author:

Sprengel Maximilian¹^ORCID,Mohr Gunther¹,Altenburg Simon J.¹^ORCID,Evans Alexander¹,Serrano-Munoz Itziar¹^ORCID,Kromm Arne¹^ORCID,Pirling Thilo²^ORCID,Bruno Giovanni¹³^ORCID,Kannengiesser Thomas¹⁴^ORCID

Affiliation:

1. Weld Mechanics and Micro Non‐Destructive Testing Bundesanstalt für Materialforschung und -Prüfung (BAM) Unter den Eichen 87 12205 Berlin Germany

2. Diffraction Institut Max von Laue – Paul Langevin (ILL) 71, avenue des Martyrs – CS 20156 Grenoble cedex 9 38042 France

3. Institute of Physics and Astronomy University of Potsdam Karl-Liebknecht-Straße 24/25 14476 Potsdam Germany

4. Institute of Materials and Joining Technology (IWF) Otto von Guericke University of Magdeburg Universitätsplatz 2 39106 Magdeburg Germany

Funder

Bundesanstalt für Materialforschung und -Prüfung

Publisher

Wiley

Subject

Condensed Matter Physics,General Materials Science

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202101330

Reference61 articles.

1. Additively manufactured hierarchical stainless steels with high strength and ductility

2. Additive manufacturing of steels: a review of achievements and challenges

3. Additive manufacturing of metallic components – Process, structure and properties

4. An overview of residual stresses in metal powder bed fusion

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. A method for rapid estimation of residual stresses in metal samples produced by additive manufacturing;Frattura ed Integrità Strutturale;2024-02-24

2. Experimental studies and the model of anisotropic plasticity for additively manufactured stainless steel with stress state dependent properties;Continuum Mechanics and Thermodynamics;2024-02-22

3. Simultaneous Optimization of Surface Roughness and Mechanical Properties of 316L Produced by LB–PBF Using Grey Relational Analysis Complemented by Residual Stress Analysis;Arabian Journal for Science and Engineering;2023-08-29

4. Texture-based residual stress analysis of laser powder bed fused Inconel 718 parts;Journal of Applied Crystallography;2023-06-30

5. Understanding Inhomogeneous Mechanical Properties in PBF-LB/M Manufactured Parts Due to Inhomogeneous Macro Temperature Profiles Based on Process-Inherent Preheating;Journal of Manufacturing and Materials Processing;2023-05-05