Analysis of damage evolution in single‐lap and double‐lap bolted joints of carbon fiber reinforced polymer plates based on load distribution

Abstract

AbstractIt is important to study damage evolution as well as failure of carbon fiber reinforced polymer (CFRP) plates bolted joints. Therefore, the quasi‐static tensile test on single‐lap and double‐lap CFRP plates bolted joints was conducted. Meanwhile, the tensile strength prediction model for titanium alloy bolted joint of CFRP plates was established based on the improved 3D Hashin failure criterion, then a theoretical model was proposed to accurately predict the load distributions and tilt angle of bolted joints. Thus, the load–displacement curves were divided into four stages, and load distributions at different stage points as well as the relationship between tilt angle of bolt and load variation were obtained. The damage evolution of single‐lap and double‐lap at different stage points was analyzed respectively, and failure mechanisms were revealed based on load distribution. The results show that the ultimate failure of single‐lap is caused by the intrusion of bolt head into CFRP plates, while double‐lap is caused by the compression deformation of central plate. The numerical simulation works are in high agreement with the experimental results.Highlights Calculate the load distribution at single‐lap and double‐lap bolted joints. Obtain the relationship between bolts tilt angle and load variation. Analysis of damage evolution in bolt‐hole wall of carbon fiber reinforced polymer (CFRP) plates. Using loads to reveal the failure mechanisms of single‐lap and double‐lap bolted joints of CFRP plates.