Affiliation:
1. Laboratory for Thin Films and Photovoltaics Empa‐Swiss Federal Laboratories for Materials Science and Technology Überlandstrasse 129 8600 Dübendorf Switzerland
2. Sustainable Energy Center Centre Suisse d’Electronique et de Microtechnique (CSEM) Jaquet‐Droz 1 2002 Neuchâtel Switzerland
3. Fluxim AG Katharina‐Sulzer‐Platz 2 8400 Winterthur Switzerland
Abstract
The use of carbazole‐based self‐assembled monolayer (SAM) as a hole transport layer (HTL) has led to the efficiency advancement in p–i–n perovskite solar cells (PSCs). However, PSCs with SAM HTL display a large spread in device performance even on small‐area substrates owing to poor SAM surface coverage and dewetting of the perovskite ink. Efforts to improve the uniformity in device performance of SAM‐based PSCs have been confined to spin‐coating method, which lacks high‐throughput capabilities and leads to excessive material wastage. Herein, a scalable bilayer HTL stack with sputtered NiO and blade‐coated SAM is utilized to achieve improved SAM coverage and accomplish uniform coating of perovskite absorber on 5 cm × 5 cm substrates. Fully scalable p–i–n PSCs with efficiency close to 19% with a minimal spread in device performance are achieved. To showcase the upscaling potential, near‐infrared‐transparent perovskite mini‐modules with efficiency close to 15% and 13% are achieved on an aperture area of 2.56 and 12.96 cm2. Together with low‐bandgap (1.0–1.1 eV) Cu(In,Ga)Se2 (CIGS) mini‐modules, the first fully scalable 4‐terminal perovskite‐CIGS tandem mini‐module with an efficiency of 20.5% and 16.9% on an aperture area of 2.03 and 10.23 cm2 is demonstrated.