The Effect of Martensite-Austenite Constituent Characteristics on the Mechanical Behavior of Quenched-Partitioned Steel at Room Temperature-Reference-Cited by-同舟云学术

The Effect of Martensite-Austenite Constituent Characteristics on the Mechanical Behavior of Quenched-Partitioned Steel at Room Temperature

Published:2018-10-09 Issue:3 Volume:90 Page:1800399
ISSN:1611-3683
Container-title:steel research international
language:en
Short-container-title:steel research int.

Author:

Karam-Abian Mahdi¹,Zarei-Hanzaki Abbas¹,Abedi Hamidreza¹,Ghodrat Sepideh²,Hajy-Akbary Farideh²,Kestens Leo³²

Affiliation:

1. The Complex Laboratory of Hot Deformation and Thermomechanical Processing of High Performance Engineering Materials; School of Metallurgy and Materials Engineering; College of Engineering, University of Tehran; Tehran Iran

2. Department of Materials Science and Engineering; Delft University of Technology; Mekelweg 2, 2628 CD Delft The Netherlands

3. Metals Science and Technology Group; EEMMeCS Dept.; Ghent University; Technologiepark 903 9052 Gent Belgium

Publisher

Wiley

Subject

Materials Chemistry,Metals and Alloys,Physical and Theoretical Chemistry,Condensed Matter Physics

Link

http://onlinelibrary.wiley.com/wol1/doi/10.1002/srin.201800399/fullpdf

Reference40 articles.

1. The Local Characterization of Individual Phase Mechanical Properties Using Nano-Indentation and In Situ Scanning Probe Microscopy in an Advanced High Strength Steel

2. The Correlation of Macrostructure, Microstructure, and Texture with Room Temperature Mechanical Properties of a Twinning-Induced Plasticity Automotive Steel after Friction Stir Spot Welding/Processing

3. Carbon partitioning into austenite after martensite transformation

4. High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. A Strategy for Simultaneous Increasement in the Strength-Ductility Balance of Directly-Quenched Ultra-High Strength Low Alloy Steel;Metals and Materials International;2024-09-06

2. Dynamic deformation behavior of Fe-0.22C-1.65Si-1.98Mn quenching and partitioning steel over a wide range of strain rates and constitutive model establishment;Materials Today Communications;2024-08

3. Stress Intensity Range Dependent Slowing Down of Fatigue Crack Growth under Strain‐Induced Martensitic Transformation of Film‐Like Retained Austenite;steel research international;2024-01-22

4. An improved analytic model for extracting plastic mechanical property of matrix in hot-extruded in-situ TiB2/2024 composite based on Berkovich indentation experimental results;Materials Science and Engineering: A;2023-08

5. In-Situ Production of Metal Matrix Composites Layers by TIG Surface Alloying to Improve Wear Resistance of Ductile Cast Iron Using a Buffer-Layer and Post Weld Heat Treatment;Coatings;2023-06-22