Author:
Karpenko Mykola,Prentkovskis Olegas,Šukevičius Šarūnas
Abstract
Reliability and maintenance analysis of transport machines hydraulic drives, basically focused to power units: pumps, cylinders etc., without taking in to account junction elements. Therefore, this paper proposes a research analysis on high-pressure hoses and junctions during technical maintenance. Comparative analysis of fluid behavior and energy efficiency inside non-repaired and repaired high-pressure hoses is presented in this research. Theoretical and experimental research results for hydraulic processes inside high-pressure hose is based on the numerical simulations using Navier–Stokes equations and experimental measurement of fluid flow pressure inside high-pressure hoses. Research of fluid flow dynamics in the hydraulic system was made with main assumptions: system flow rate in the range from 5 to 100 l/min, diameter of the hoses and repairing fitting are 3/8". The pressure drops, power losses, flow coefficients at non-repaired and after maintenance hose was obtained as a result. Simulation results were verified by running physical experiments to measure the pressure losses.
Publisher
Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne
Subject
Industrial and Manufacturing Engineering,Safety, Risk, Reliability and Quality
Reference44 articles.
1. 1. ANSYS Fluent Theory Guide, 2013. ANSYS, Inc., 275 Technology Drive Canonsburg, PA 15317.
2. 2. Biluš I, Škerget L, Predin A, Hriberšek M. Experimental and numerical analyses of the cavitational flows around a hydrofoil. Strojniški vestnik - Journal of Mechanical Engineering 2005; 51(2): 103-118.
3. 3. Bogdevičius P, Prentkovskis O, Bogdevičius M. Transmission with cardan joint parametre influence to centrifugal pump characteristics. Mokslas – Lietuvos Ateitis / Science – Future of Lithuania 2017; 9(5): 559-564, https://doi.org/10.3846/mla.2017.1073.
4. 4. Budinski M. Failure analysis of a rubber hose in anhydrous ammonia service. Case Studies in Engineering Failure Analysis 2013; 1(2): 156-164, https://doi.org/10.1016/j.csefa.2013.04.009.
5. 5. Cho J. Anisotropic large deformation and fatigue damage of rubber-fabric braid layered composite hose. Procedia Engineering 2017; 173: 1169-1176. https://doi.org/10.1016/j.proeng.2016.12.097.
Cited by
25 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献