Comparison of 304 SS, 2205 SS, and 410 SS Corrosion by Sulfate-Reducing Desulfovibrio ferrophilus-Reference-Cited by-同舟云学术

Comparison of 304 SS, 2205 SS, and 410 SS Corrosion by Sulfate-Reducing Desulfovibrio ferrophilus

Published:2021-06-17 Issue: Volume:2021 Page:1-10
ISSN:2090-9071
Container-title:Journal of Chemistry
language:en
Short-container-title:Journal of Chemistry

Author:

Wang Junlei¹²^ORCID,Liu Hongfang²^ORCID,Kijkla Pruch¹,Kumseranee Sith³,Punpruk Suchada³,El-Said Mohamed Magdy⁴,Saleh Mazen A.⁴,Gu Tingyue¹^ORCID

Affiliation:

1. Department of Chemical and Biomolecular Engineering, Institute for Corrosion and Multiphase Technology, Ohio University, Athens, OH 45701, USA

2. School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China

3. PTT Exploration and Production, Bangkok 10900, Thailand

4. Research and Development Center, Saudi Arabian Oil Company, Dhahran 31311, Saudi Arabia

Abstract

Three types of stainless steel (304 SS, 410 SS, and 2205 SS) were evaluated for their corrosion behaviors in microbiologically influenced corrosion (MIC) by Desulfovibrio ferrophilus strain IS5, a relatively new and very corrosive sulfate-reducing bacteria (SRB) strain. The incubation lasted for 7 days in enriched artificial seawater at 28°C and the results showed that 410 SS had a rather large weight loss (6.2 mg/cm2) and a maximum pit depth (118 µm), but 2205 SS and 304 SS did not suffer from significant weight loss or pitting. Electrochemical tests indicated that 2205 SS was slightly more resistant to SRB MIC than 304 SS, while 410 SS was far less resistant.

Funder

Saudi Aramco

Publisher

Hindawi Limited

Subject

General Chemistry

Link

http://downloads.hindawi.com/journals/jchem/2021/3268404.pdf

Reference35 articles.

1. Effects of pH and dissolved oxygen on electrochemical behavior and oxide films of 304SS in borated and lithiated high temperature water

2. Kinetics of Pitting Dissolution of Austenitic Stainless Steel 304 in Sodium Chloride Solution

3. Synergistic effect of temperature and HCl concentration on the degradation of AISI 410 stainless steel