3D Printed and Photonically Cured Graphene UHF RFID Tags on Textile, Wood, and Cardboard Substrates-Reference-Cited by-同舟云学术

3D Printed and Photonically Cured Graphene UHF RFID Tags on Textile, Wood, and Cardboard Substrates

Published:2017 Issue: Volume:2017 Page:1-8
ISSN:1687-5869
Container-title:International Journal of Antennas and Propagation
language:en
Short-container-title:International Journal of Antennas and Propagation

Author:

Akbari M.¹^ORCID,He H.¹^ORCID,Juuti J.²,Tentzeris M. M.³,Virkki J.¹^ORCID,Ukkonen L.¹^ORCID

Affiliation:

1. BioMediTech Institute and Faculty of Biomedical Sciences and Engineering, Tampere University of Technology, Tampere, Finland

2. Microelectronics Research Unit, University of Oulu, Oulu, Finland

3. School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA

Abstract

This paper introduces 3D direct writing and microdispensing of graphene ultrahigh frequency (UHF) radio-frequency-identification (RFID) antennas on textile, wood, and cardboard substrates, subsequently cured either by conventional oven or photonically by pulsed Xenon flashes. Photonic-cured passive UHF RFID graphene tags on cardboard, wood, and textile substrates achieve read ranges of 5.4, 4.6, and 4 meters, respectively. These results are superior to those achieved by the oven-cured tags that featured read ranges of 4.8, 4.5, and 3.6 meters, respectively. This work presents the first integration of 3D printing and photonic curing of graphene antennas on low-cost versatile substrates.

Funder

Suomen Akatemia

Publisher

Hindawi Limited

Subject

Electrical and Electronic Engineering

Link

http://downloads.hindawi.com/journals/ijap/2017/7327398.pdf

Reference9 articles.

1. A review on 3D micro-additive manufacturing technologies

2. Applicability of Metallic Nanoparticle Inks in RFID Applications

3. Applications of graphene devices in RF communications

Cited by 10 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Recent Advances in the Photonic Curing of the Hole Transport Layer, the Electron Transport Layer, and the Perovskite Layers to Improve the Performance of Perovskite Solar Cells;Nanomaterials;2024-05-19

2. Facile formation of porous, multilayer reduced graphene oxide electrodes using electrophoretic deposition and flash sintering;Carbon;2023-01

3. Textile additive manufacturing: An overview;Cogent Engineering;2022-03-24

4. Compact Biodegradable UHF RFID Tag for Short Life Cycle Applications;2021 IEEE Indian Conference on Antennas and Propagation (InCAP);2021-12-13

5. Review on the Integration of Microelectronics for E-Textile;Materials;2021-09-06