Affiliation:
1. Department of Chemical Engineering, Faculty of Engineering, University of Indonesia, Depok 16424, Indonesia
Abstract
Trickle-bed reactor (TBR) modelling to produce green fuel via hydrocracking of jatropha oil using silica-alumina-supported Ni-W catalysts was performed in this research. The objectives of this study are to obtain a TBR with good heat transfer and the optimum condition for high purities of products. A two-dimensional axisymmetric model with a diameter of 0.1 m and a length of 10 m was used as a representative of the actual TBR system. Heterogeneous phenomenological models were developed considering mass, energy, and momentum transfers. The optimisation was conducted to obtain the highest green fuel purity by varying catalyst particle diameter, inlet gas velocity, feed molar ratio, and inlet temperature. The simulation shows that a TBR with an aspect ratio of 100 has achieved a good heat transfer. The diesel purity reaches 44.22% at 420°C, kerosene purity reaches 21.39% at 500°C, and naphtha purity reaches 25.30% at 500°C. The optimum condition is reached at the catalyst diameter of 1 mm, the inlet gas velocity of 1 cm/s, the feed molar ratio of 105.5, and the inlet temperature at 500°C with the green fuel purity of 69.4%.
Subject
General Chemical Engineering
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献