Affiliation:
1. Bryansk State Technical University
2. Bryanskiy gosudarstvennyy tehnicheskiy universitet
Abstract
Work objective: development of devices for high-precision machining of machine parts.
The problem to which the paper is devoted is to analyze the accuracy of devices with location vees.
Research methods: modelling of the contact of the workpiece contact with the location vee by means of the theory of dimensional connections, analysis of some model parameter influence using sensitivity analysis, regression analysis of the results of modeling the workpiece fixing in the location vees.
The novelty of the work: the influence of form tolerances and the relative location of the base surfaces are established when calculating the accuracy of fixing workpieces in location vees; the features of forming basing error in the worst case (by maximum-minimum method) and taking into account the probability of size distribution within the tolerances (by the probabilistic method) are revealed.
The results of the study: a model is developed for installing the workpiece into a vee, taking into account misalignment and deviations from roundness, dependencies are obtained for estimating the error of basing the workpiece in the location vees, taking into account these macro-displacements.
Conclusions: the error of basing the workpiece in the vee is influenced by the tolerances of the form and location of the base surfaces; taking into account the errors of the form and location of the workpiece base surfaces make it possible to form the error of the base in the horizontal plane.
Publisher
Bryansk State Technical University BSTU
Reference10 articles.
1. Дальский А.М. и др. Справочник технолога-машиностроителя: В 2 т. / Под ред. А.М. Дальского и др.; Т. 1. 5 изд., испр. М.: Машиностроение; Изд-во Машиностроение-1, 2003 (ППП Тип. Наука). 910 с., Dal'skiy A.M. i dr. Spravochnik tehnologa-mashinostroitelya: V 2 t. / Pod red. A.M. Dal'skogo i dr.; T. 1. 5 izd., ispr. M.: Mashinostroenie; Izd-vo Mashinostroenie-1, 2003 (PPP Tip. Nauka). 910 s.
2. Филькин Д.М., Польский Е.А. Анализ точности установки заготовок на опорные призмы с учетом влияния размерных связей // Наукоемкие технологии в машиностроении. 2020. №6(108). С. 21-27., Fil'kin D.M., Pol'skiy E.A. Analiz tochnosti ustanovki zagotovok na opornye prizmy s uchetom vliyaniya razmernyh svyazey // Naukoemkie tehnologii v mashinostroenii. 2020. №6(108). S. 21-27.
3. Польский Е.А., Сорокин С.В. Технологическое обеспечение надежности деталей узлов трения наукоемких сборочных единиц // Вестник Брянского государственного технического университета. 2019. № 4(77). C. 19-26. doi 10.30987/article_5cb58f4f589ff6.30206728., Pol'skiy E.A., Sorokin S.V. Tehnologicheskoe obespechenie nadezhnosti detaley uzlov treniya naukoemkih sborochnyh edinic // Vestnik Bryanskogo gosudarstvennogo tehnicheskogo universiteta. 2019. № 4(77). C. 19-26. doi 10.30987/article_5cb58f4f589ff6.30206728.
4. Качество машин: Справ. в 2 т. / Т. 1.; Под общ. ред. А. Г. Суслова. М.: Машиностроение, 1995. 253 с., Kachestvo mashin: Sprav. v 2 t. / T. 1.; Pod obsch. red. A. G. Suslova. M.: Mashinostroenie, 1995. 253 s.
5. Weihua N., Zhenqiang Y. Cylindricity modeling and tolerance analysis for cylindrical components// The International Journal of Advanced Manufacturing Technology. 2012. №64(5-8). С. 867–874. doi 10.1007/s00170-012-4078-3., Weihua N., Zhenqiang Y. Cylindricity modeling and tolerance analysis for cylindrical components// The International Journal of Advanced Manufacturing Technology. 2012. №64(5-8). S. 867–874. doi 10.1007/s00170-012-4078-3.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献