Simulation of the Behavior of 32-Layer Composite Plate for Ballistic Protection-Reference-Cited by-同舟云学术

Simulation of the Behavior of 32-Layer Composite Plate for Ballistic Protection

Published:2022-12-02 Issue:4 Volume:14 Page:95-109
ISSN:2247-4528
Container-title:INCAS BULLETIN
language:en
Short-container-title:INCAS BULLETIN

Author:

OJOC George Ghiocel¹,CHIPER TITIRE Larisa¹,DELEANU Lorena²,MUNTENITA Cristian¹,PIRVU Catalin³

Affiliation:

1. “Dunarea de Jos” University, Faculty of Engineering, Department of Mechanical Engineering, 111 Domneasca, Galati, Romania

2. “Dunarea de Jos” University, Faculty of Engineering, Department of Mechanical Engineering, 111 Domneasca, Galati, Romania, lorena.deleanu@ugal.ro

3. INCAS – National Institute for Aerospace Research “Elie Carafoli”, 220 Avenue Iuliu Maniu, Bucharest 061126, Romania, pirvu.catalin@incas.ro

Abstract

This paper presents experimental results and a failure analysis of a composite for ballistic protection. The stratified plate is manufactured at laboratory scale, after a technology designed by the authors. The plates were tested for level FB2, taking into account the standard SR EN 1522:2004 (Windows, doors, shutters and blinds. Bullet resistance. Requirements and classification) and SR EN 1523:2004 (Windows, doors, shutters and blinds. Bullet resistance. Test method) and the results point out that this plate could face more dangerous threats. In order to evaluate the behavior of the plate under the impact characterizing a higher level of threat, the authors uses a FE model and simulated the system bullet – plate for different impact velocities.

Publisher

INCAS - National Institute for Aerospace Research Elie Carafoli

Subject

Aerospace Engineering,Control and Systems Engineering

Reference19 articles.

1. [1] J. Donea, A. Huerta, J.-Ph. Ponthot & A. Rodrıguez-Ferran, Chapter 14. Arbitrary Lagrangian–Eulerian Methods, In Stein, E., de Borst R. & Hughes T. J. R. (Eds.), Encyclopedia of Computational Mechanics, Volume 1: Fundamentals, John Wiley & Sons, Ltd, 2004.

2. [2] W. F. Hosford, Mechanical Behavior of Materials, (2nd ed.), Cambridge University Press, UK, 2010.

3. [3] H.-H. Lee, Finite Element Simulations with ANSYS Workbench 2021, SDC Publications. USA, 2021.

4. [4] M. A. Meyers, Dynamic Behavior of Materials, John Wiley & Sons, Inc., USA, 1994.

5. [5] * * * 1200 g/m2 Quadriaxial Stitched Glass Fabric (0º/+45º/90º/-45º), 127 cm wide (accessed 12.01.2022), https://www.castrocompositesshop.com/en/fibre-reinforcements/1204-1200-gm2-quadriaxial-stitched-glass-fabric-0%C2%BA45%C2%BA90%C2%BA-45%C2%BA-127-cm-wide.html